Shop AutoValue and Bumper to Bumper stores directly from your Garage Management or Point of Sales application.
System Requirements
- PLEASE MAKE SURE YOU ARE RUNNING MITCHELL VERSION 7.5 OR GREATER IF YOU ARE NOT PLEASE CONTACT MITCHELL SUPPORT FOR AN UPGRADE.
- THIS INSTALL REQUIRES A USER NAME AND PASSWORD. IF YOU DO NOT HAVE ONE PLEASE CONTACT YOUR PARTS STORE.
System Requirements
- PLEASE MAKE SURE YOU ARE RUNNING MITCHELL VERSION 7.5 OR GREATER IF YOU ARE NOT PLEASE CONTACT MITCHELL SUPPORT FOR AN UPGRADE.
- THIS INSTALL REQUIRES A USER NAME AND PASSWORD. IF YOU DO NOT HAVE ONE PLEASE CONTACT YOUR PARTS STORE.
System Requirements
- RO Writer 1.29 or greater.
- Internet Explorer 9 or greater.
- Microsoft .Net 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- Download code provided by your Auto parts Supplier (If this is for Bay-masteR Cloud Version Please make sure it is noted on your request. There is no Installation required for Bay-masteR Cloud Version – Bay-masteR support will complete the set up)
For Cloud Based Versions, please contact Bay-masteR Support. 1-800-922-2378 NO INSTALL REQUIRED.
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- AUTOWORK.....Coming Soon...
System Requirements
- COSTAR.....Coming Soon...
System Requirements
- GenesisFour.....Coming Soon...
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5.
- Download code provided by your Auto parts Supplier.
System Requirements
- AUTO REFINISH.....Specialized installation, contact Mark Mamo.
System Requirements
- CCC ONE.....Specialized installation, contact Mark Mamo.
System Requirements
- TURBOPARTS.....Specialized installation, this requires participation from your parts store. Please contact your parts store for more information.. This is integration is used to integrate in the following Systems. This may also work in other GMS systems not listed. Please contact your parts store for more information.
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |
System Requirements
- WHI.....Specialized installation, contact Mark Mamo.
System Requirements
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- Download code provided by your Auto parts Supplier
System Requirements
- Internet Explorer 9 or greater.
- Microsoft .NET 3.5
- Download code provided by your Auto parts Supplier
System Requirements
System Requirements
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- Download code provided by your Auto parts Supplier
System Requirements
- Leventas(BennettAuto.com).....Specialized installation, contact Mark Mamo.
System Requirements
- WHI Nexpart (ACDelco).....Specialized installation, contact Mark Mamo.
System Requirements
- Vinnistore.ca.....Specialized installation, contact Mark Mamo.
System Requirements
- Must be using the .Net Version of Protractor
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- This integration requires a Seller / Buyer ID provided by your Parts Supplier
System Requirements
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- Download code provided by your Auto parts Supplier
System Requirements
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- This integration requires a Seller / Buyer ID provided by your Parts Supplier
System Requirements
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- Download code provided by your Auto parts Supplier
System Requirements
- Must be using the .Net Version of Manager Enterprise
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- This integration requires a Seller / Buyer ID provided by your Parts Supplier
System Requirements
- Internet Explorer 9 or greater
- Microsoft .NET 3.5
- This integration requires a Seller / Buyer ID provided by your Parts Supplier
 |  |  |  |
 |  |  |  |
 |  |  |  |
 |  | |  |
 | |  |  |
System Requirements
- Specialized installation, contact Mark Mamo.
Installation Instructions
Download
Step 1
Installation
- PLEASE CLOSE MITCHELL then Click Download and install MYPLACE4PARTS catalog.
Step 2
- OPEN MITCHELL and Click on Configuration / Special Maintenance / Toggle Catalog Availability.
- MAKE SURE YOU ARE IN THE MITCHELL SPLASH SCREEN AS SEEN BELOW.
Step 3
- TURN ON the Catalog/Catalogs you wish to use. CLICK SAVE TO CONTINUE.
Step 4
Configuration
- CONFIGURE THE VENDOR AND LINK TO YOUR CATALOG – Click Configuration / Vendor Setup.
- You can edit an existing Vendor and Link it to the Catalog you wish to use or Add a new one.
Step 5
- LINKING THE VENDOR TO THE CATALOG – Click Setup Link and Choose either the Auto Value or Bumper to Bumper Catalog and Click OK. You will need to Keep clicking OK to accept all the changes. Clicking Cancel will not save your changes.
Step 6
- Entering the User Name and Password.
- After you select your Catalog Link you will be prompted to enter a User Name and Password.
- You will use the Buyer ID as the User Name and Seller ID as the Password. YOUR MYPLACE CREDENTIALS WILL NOT WORK HERE. YOU NEED TO REQUEST A BUYER ID AND SELLER ID FROM YOUR PARTS SUPPLIER IF YOU DO NOT HAVE ONE.
Step 7
- COMPLETION – You can now open up a work order and you will see the Catalog You turned on and when you click on the Catalog Button it will launch MYPLACE4PARTS for whatever Supplier your linked to that button.
How To - Videos
Installation Video
Basic Functionality
Download
Step 1
Installation
- Shut down the Mitchell/ShopKey management application.
- Click the download button
in the Upper Right hand corner of this window and choose Run.
Step 2
- Enter the download code provided to you by your parts supplier and click next.
Step 3
- The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration. It will then prompt you to select Catalog you wish to install. Select either Auto Value or Bumper to Bumper to activate the button inside Mitchell. (Please make sure you have exited Mitchell Prior to Clicking Install).
- After you click install you will receive a message saying "Mitchell SDK installed successfully".
Step 4
- You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly".
Step 5
Configuration
- Once installation is complete, and the "SE" application is opened/restarted, the AutoValue / Bumper to Bumper catalog needs to be turned on. To do this, go to home screen where the initial home screen is displayed, (not the WIP Screen). Select Configurations | Special Maintenance | Toggle Catalog Availability from the menu and then turn on AutoValue or Bumper to Bumper by clicking on the button and make sure the button is turned "On".
- With AutoValue or Bumper to Bumper turned on, you will need to setup the link for an existing Vendor or create a new Vendor record to setup the 'AutoValue Link' or 'Bumper to Bumper Link'. To do this, go to Configurations | Vendor Setup from the Configuration menu. Either Edit an existing Vendor or add a new Vendor. On the Edit Vendor screen, Click on Setup Link. Choose Setup AutoValue Link or Bumper to Bumper and click OK. (If another link is already selected, you will need to first Unlink it and then Setup the link to AutoValue or Bumper to Bumper). You will then be asked to provide a Username and Password.
Note: You can use the MPFP Username and Password or use the download code in both fields. This is a required field and must be filled in but it does not affect the connection.
- Once you have entered your User Profile and Password and clicked OK, the AutoValue or Bumper to Bumper button will appear on the bottom section of your work orders. Your customer is now set up and ready to use the catalog.
Notice to Mitchell Users ONLY
A recent release has cause a problem for some Mitchell users. The following steps will fix this problem
| 1. Close out of your Mitchell application 2. Select (Click) the 'DOWNLOAD' link below that is highlighted in yellow 3. A download will start. Once completed, select to RUN this file. | | | For additional assistance, you may contact Mark Mamo 281.466.4741 |
We apologize for any inconvenience this has caused.
DOWNLOAD
Download 
Step 1
Installation
- Shut down the Mitchell/ShopKey management application.
- Click the download button
in the Upper Right hand corner of this window and choose Run.
Step 2
- Enter the download code provided to you by your parts supplier and click next.
Step 3
- The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration. It will then prompt you to select Catalog you wish to install. Select either Auto Value or Bumper to Bumper to activate the button inside Mitchell. (Please make sure you have exited Mitchell Prior to Clicking Install).
- After you click install you will receive a message saying "Mitchell SDK installed successfully".
Step 4
- You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly".
Step 5
Configuration
- Once installation is complete, and the "SE" application is opened/restarted, the AutoValue / Bumper to Bumper catalog needs to be turned on. To do this, go to home screen where the initial home screen is displayed, (not the WIP Screen). Select Configurations | Special Maintenance | Toggle Catalog Availability from the menu and then turn on AutoValue or Bumper to Bumper by clicking on the button and make sure the button is turned "On".
- With AutoValue or Bumper to Bumper turned on, you will need to setup the link for an existing Vendor or create a new Vendor record to setup the 'AutoValue Link' or 'Bumper to Bumper Link'. To do this, go to Configurations | Vendor Setup from the Configuration menu. Either Edit an existing Vendor or add a new Vendor. On the Edit Vendor screen, Click on Setup Link. Choose Setup AutoValue Link or Bumper to Bumper and click OK. (If another link is already selected, you will need to first Unlink it and then Setup the link to AutoValue or Bumper to Bumper). You will then be asked to provide a Username and Password.
Note: You can use the MPFP Username and Password or use the download code in both fields. This is a required field and must be filled in but it does not affect the connection.
- Once you have entered your User Profile and Password and clicked OK, the AutoValue or Bumper to Bumper button will appear on the bottom section of your work orders. Your customer is now set up and ready to use the catalog.
Notice to Mitchell Users ONLY
A recent release has cause a problem for some Mitchell users. The following steps will fix this problem
| 1. Close out of your Mitchell application 2. Select (Click) the 'DOWNLOAD' link below that is highlighted in yellow 3. A download will start. Once completed, select to RUN this file. | | | For additional assistance, you may contact Mark Mamo 281.466.4741 |
We apologize for any inconvenience this has caused.
DOWNLOAD
Download
Step 1
Installation
- Shut down the Mitchell/ShopKey management application.
- Click the download button in the Upper Right hand corner of this window and choose Run.
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download Instructions Guide
Download
Step 1
Installation
- Shut down the Bay-masteR management application
- Click the download button in the Upper Right hand corner of this window and choose Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
- You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"
Note:FOR CLOUD BASED VERSION PLEASE CONTACT Bay-masteR Support - No Install Required.
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Download
Step 1
Installation
- Exit the host system application.
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
- Click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".
Specialized installation, contact Mark Mamo
Specialized installation, contact Mark Mamo
Specialized installation, contact Mark Mamo
Specialized installation, contact Mark Mamo
Download
Step 1
Installation
- Shut down the Pace – Yes Management application
- Click the download button in the Upper Right hand corner of this window and choose Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
- You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"
Contact Pace Support at 1-800-336-1615 or http://yesshopsoftware.com/
Download
Step 1
Installation
- Shut down the TIRESHOP application
- Click the download button in the Upper Right hand corner of this window and choose Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
- You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"
Contact FREEDOMSOFT Support at 1-888-750-8473
This integration requires information for your Supplier for AConneX or IAP. Please contact your Supplier for the information needed and then click on the link below for your request.
Click here This integration requires information for your Supplier for AConneX or IAP. Please contact your Supplier for the information needed and then click on the link below for your request.
Click here Download
Step 1
Installation
- Shut down the G2 application
- Click the download button in the Upper Right hand corner of this window and choose Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
- You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"
Contact G2 Support at 1 800.466.5518
Download
Step 1
Installation
- This integration is for AC Delco and allows their users to Integrate to the MyPlaceFopParts Sell Network for their Auto Value / Bumper to Bumper Parts Suppliers.
- Please contact your parts supplier and request them to have their MyPlace Admin to submit an i-Support ticket for WHI Nexpart Credentials for Parts Warehouse Inc..
Download
Step 1
Installation
- This integration is specialized for specific Auto Value Stores only. Please contact VinniStore.ca for a complete list of stores that participate.
- Please contact VinniStore.ca with any questions.https://www.vinnistore.us/en_us/contacts
- Emails:
sales@vinnistore.us
support@vinnistore.us - Head Office:
7575 Trans-Canada Highway, Suite 500
Saint-Laurent, QC H4T 1V6
Canada.
Download
Step 1
Installation
- Email Support@protractor.com you Seller / Buyer ID provided by your Parts Supplier. Protractor support will configure and show the user how to use the Alliance – Auto Value/ Bumper to Bumper connection inside their Catalog.
Download
Step 1
Installation
- Shut down the STOCKTRAC management application
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"
CONTACT STOCKTRAC SUPPORT FOR ASSITANCE CONFIGURING THIS CATALOG INSIDE STOCKTRAC. support@stocktrac.com
800-782-5872 for United Stated
800-323-5872 for Canada
Download
Step 1
Installation
- Email your support contact at Prositrak the Seller / Buyer ID provided by your Parts Supplier. Positrak support will configure and show the user how to use the Alliance – Auto Value/ Bumper to Bumper connection inside their system.
Download
Step 1
Installation
- Shut down the FASTTRAK management application
- Click the download button in the Upper Right hand corner of this window and select Run.
- Enter the download code provided to you by your parts supplier and click next.
Step 2
- The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
At End
- You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly".
Download Instructions Guide
Download
Step 1
Installation
- Email Support@protractor.com you Seller / Buyer ID provided by your Parts Supplier. Protractor support will configure and show the user how to use the Alliance – Auto Value/ Bumper to Bumper connection inside their Catalog.
Download
Step 1
Installation
- Email your support contact at PARTSTECH the Seller / Buyer ID provided by your Parts Supplier. PARTSTECH support will configure and show the user how to use the Alliance – Auto Value/ Bumper to Bumper MyPlace Sellnetwork inside their system.
YOU WILL NEED A USER NAME AND PASSWORD FROM YOUR PARTS SUPPLIER. IF YOU DO NOT HAVE ONE PLEASE CONTACT YOUR PARTS STORE. THEY ARE THE ONLY ONES WHO CAN PROVIDE THIS TO YOU. IF YOU HAVE AN ISSUE INSTALLING THE CATALOG, PLEASE CONTACT MARK MAMO
Complete instructions can be found HERE
PLEASE HAVE YOUR DOWNLOAD CODE READY. IF YOU DON'T HAVE A DOWNLOAD CODE, PEASE CONTACT YOUR PARTS SUPPLIER FOR ONE.
For assistance installing this catalog server, contact Mark Mamo
mmamo@alliance1.com 281.466.4741